There’s nothing worse than having to deal with dents and dings on your car. Vehicles are a big investment. Having a noticeable blemish immediately depreciates the value of your car and ruins an otherwise pristine exterior look. While you could easily bring your car to an auto shop for dent removal service, it’s not a cheap endeavour. A small dent can cost you upwards of $100 or more. If you’re dealing with a bigger cosmetic issue, the price could go even more.
Luckily, you can take care of the problem yourself with a high-quality car dent puller. These devices put the power in your hands. You can save money on repair costs and keep your ride looking great for many years to come. They come in a wide range of styles, allowing you to find the perfect solution for your situation. If you’re worried about the DIY aspect of a dent puller, there’s no need to fret. They’re very user-friendly and are designed to keep the unscathed parts of your car safe.
The market is flooded with dent pullers to choose from. If you’re not familiar with these devices, it’s very easy to get overwhelmed with all the options. Here is a selection of dent pullers to get you started on your search.
This dent puller from Yoohe is simple, yet effective. It’s a suction-based puller that takes advantage of manual force. The housing is made of tough aluminum. It features an innovative handle design. One part handle remains vertical at all times. The other side is connected to the rubber suction base.
When you’re positioning it over the dent, one side of the handle is down. To create a vacuum, simply lift the handle into place. This one-stroke pump action is enough to create a tight seal on the surface of your car. The suction base is made of thick rubber. It measures just under five inches in diameter.
Wide suction base
Easy to use
May not be effective on smaller dents
Requires manual pulling force
These pullers are an affordable option that can be used on dents of different sizes. They’re very similar in design to the previous pullers. However, their smaller size makes it easy to get into tight spots. Furthermore, these pullers come in a set of two. In addition to repairing small dents, using them both at one time may be effective for larger dents as well.
Each puller has a diameter of about 2.19 inches. The suction base is made of thick rubber. The handles and base are made of impact-resistant nylon plastic
Comes in a set of two
Thick rubber base
May require the use of lubrication oil for tighter seal
If you’re looking for a professional tool, this option from H & S Auto Shot may be for you. It’s a self-contained unit with a unique design. It’s a suction-based puller. However, instead of a single-pump handle, it has an air pump built right in. The pump creates a tight vacuum around the dent. There’s no need for airlines or a compressor.
The puller comes with three different rubber suction bases. They measure three, four, and five inches in diameter. There’s also a rubberized handle near the suction base, allowing you to get a better grip on the device.
Comes with multiple suction bases
Made of tough metal
Includes storage case
Higher price tag
May not be suitable for plastic bodies
This kit from Super PDR has you covered for most dent issues. It includes a number of different tools to tackle dents big and small. There’s a tool for larger dents, two different types of bridge pullers, and a hammer rod. It even comes with its own hammer and many different rod tips.
There’s also an included hot glue gun, heat-resistant gloves, and a line board that can help you find subtle dents with ease. Rather than using traditional rubber on the puller bases, thick silicone is used. All of these tools come in a handy carrying case for your convenience.
Includes multiple metal tools
Includes multiple rod tips and puller bases
Doesn’t include suction tool
Can be confusing to find the right tool for a job
With 92 pieces, this kit can be used to repair many different sizes of dents. It can take care of dents as small as 0.1 inches and dents as large as 10 inches wide. Within the kit, you’ll find two metal bridge pullers. One utilizes a traditional traction rod while the other has a strong squeeze handle. Both of them have a rubberized coating on the feet to protect your paint job.
T-pullers are also included. They can be used with one of the many different rubber bases to pull out dents manually. A hot glue gun, a collection of glue sticks, hammer rods, two different hammers, and two glue scrapers are all included.
Numerous rubber tips and bases with unique textures
High-quality metal tools with rubber bases
Includes handy carrying case
Includes instruction guide
Doesn’t include a traditional suction tool
This affordable bridge puller is great for addressing small dents. The unit is approximately 9 inches wide. The two legs feature thick rubber pads to protect your car’s paint finish. Five small puller bases are included. A plastic twist handle fits on top of the threaded traction rods, making it easy to pull the dent up without manual force.
The puller also comes with everything you need to complete the repair project. This includes a glue gun, plenty of glue sticks, and even a small hammer rod for fine-tuning. The use of glue makes this puller easy to use on the sides of your car.
Twisting traction rod
Includes small hammer rod and scraper
Includes glue gun, glue sticks, and solvent
Easy to use
Not effective for large dents
Limited base sizes
Dent Puller Buying Guide
Dent pullers can be a great tool in your vehicle maintenance arsenal. They’re not one-use devices. While you may purchase one to take care of an initial dent, you’ll more than likely have to use it again at some point in your car’s life. Needless to say, it’s important to choose a puller that’s built to last. It should be able to serve you well for many repair jobs.
Not all devices and kits are made the same. To ensure that you pick an option that’s right for your needs, there are many things you should consider while you’re shopping around.
Types of Dent Pullers
There are a few different methods for taking care of dents. As a result, you’ll find a variety of puller designs. While all of the designs can certainly improve the appearance, some are more suited to specific types of dents.
Suction-based pullers are, by far, the most common types of pullers you will see. As the name implies, they utilize strong suction cups to pull the dented portion of your car out. One great thing about suction pullers is that they’re quick and easy to use. There’s very little preparation work involved.
The rubber suction base grabs onto the dent. When you pull the lever or handle, a vacuum is created. You can then pull the dent out. These pullers are ideal for small and shallow cosmetic issues. However, they do come in a number of sizes.
Bridge pullers are designed to lift the dents out without the use of manual force or suction. These kits utilize a large bridge piece and a removable traction rod.
The bridge legs are positioned around the dent. The traction rod’s base should be perfectly positioned on top of the dent. One interesting thing about bridge pullers is that they require hot glue. The glue is used to attach the base of the traction rod to the dent. When it cools down, the glue creates a safe and tight bond, allowing you to pull the dent right out. The bridge legs keep the device stable while you get the job done.
Hammer rods are a versatile tool that can take care of many different types of dents. With that being said, they do require a bit more work and skill to use successfully. Rods are typically made of metal. They’re designed to be used with a light hammer. Most kits come with a collection of rubber tips. The tips take on many different shapes so that you can manipulate your car’s exterior perfectly.
There are two different ways to use rods. The first is to tap onto the surface around the dent. Light taps with the appropriate tip create enough force to pop the dent right out. Another method is to hammer the dent from the other side of the exterior panel. These types of rods are very long. They’re also thin enough to get behind your car’s exterior panel safely. Dents are removed by applying light force to the underside of the dent.
Are you dealing with light dents from shopping carts or are you dealing with major issues from a fender bender? The seriousness of the dent you’re dealing with should always be considered before you purchase a puller. Most DIY car dent pullers are designed for paintless dents.
Paintless dents are dents without paint damage. More severe dents tend to scuff your car’s paint job. While some pullers can certainly pop the dent out, they don’t take care of the paint problem. Some pullers, such as suction-based kits, need to have a smooth surface as an anchor. Even the slightest scratch or scruff will render these types of pullers useless. It’s important to take a close look at your dent and decide whether or not a puller can complete the job efficiently.
Another thing you’ll want to consider is the size of the dent. Suction-based pullers vary in size. They can have a diameter between two and six inches. Bridge pullers also come in numerous sizes. However, because the legs need a smooth surface for stability, you’re confined to the area inside the legs.
You need to choose a puller that’s designed to work with the size of the dent you’re dealing with. If you get one that’s smaller, you run the risk of damaging your car’s exterior even further.
The material of the puller plays a big role in its overall effectiveness and longevity. Rubber is a common material you’ll find on pullers. Whether it’s used on a suction base or for the tips of hammer rods, the material is great for keeping your car’s paint protected. For suction-based pullers, the material is even more important. These devices rely solely on vacuum pressure. Thin and damaged rubber won’t do. When you’re shopping for a puller, make sure that the rubber is thick, dense, and flexible.
It’s also recommended that you pay attention to the rest of the puller. Car dent pullers can be made out of plastic or metal. Metal is always the preferred option because of its strength and durability. With that being said, plastic isn’t so bad either, as long as its thick. Don’t go with a flimsy plastic puller. It won’t last very long.
Do you know your way around a garage or are you looking for something that’s quick and simple? While most pullers are quite easy to use, some designs require a bit more automobile knowledge than others. You may want to take your mechanical prowess into consideration when you’re shopping for pullers. If you don’t know much about cars, it’s a good idea to stick with a simple suction-based puller. If you’re comfortable doing a bit more work, you may fair well with a hammer rod kit.
Finally, there’s the price. You can find pullers on both extremes of the price spectrum. While it’s always good to save money, it may be better to invest a bit more in a quality puller. Cheap dent pullers are often made out of inferior materials. A few extra bucks can get you something that lasts. Price can vary from manufacturer to manufacturer, so take some extra time to go over a product’s details and ensure that it’s appropriately priced.
Frequently Asked Questions About Dent Pullers
Q: Which Car Dent Puller is Best?
A: The best dent puller for you will depend on a number of factors. These include the size and severity of the dent. With that being said, all of the pullers on our list can provide you with great results if they are used appropriately.
Q: Can Car Dent Pullers Remove Any Dent?
A: Most car dent pullers are designed to repair paintless issues. They’re best for light dents with no exterior paint problems. If your vehicle has noticeable scuff marks or serious dents that compromise the vehicle’s frame, a puller may not be able to provide you with the results you’re after.
Q: How Long Does it Take To Fix A Dent with a Puller?
A: Again, this depends on the dent itself. Some cosmetic issues require a bit more elbow grease than others. Fortunately, dent pullers make the job much easier. Most repair jobs are quick. Suction-based pullers can get the job done in as little as five to ten minutes. However, if you’re using a hammer rod or bridge puller, it could take much longer.
Q: Do Interior Panels Need to Be Removed Before Using a Puller?
A: With suction pullers and bridge pullers, you don’t need to remove any exterior panels. All of the work done is on the exterior of the car. Hammer rods may require you to remove interior panels. However, thanks to the innovative design of thinner rods, you may not have to remove the panels completely.
Q: Do Dent Pullers Leave Marks?
A: When used correctly, pullers shouldn’t leave any marks on the exterior of the car. They’re designed to treat dents while keeping the unaffected sections safe.
Q: Will Using a Dent Puller Lower a Car’s Value?
A: A dent puller will not lower your car’s value at all. In fact, it may help to protect its value. Dents and other cosmetic issues have a significant effect on the value of any vehicle. With a puller, you can take care of dents as they happen, thus preventing any value drops beyond standard depreciation.
Q: Does Hot Glue Affect the Exterior Paint?
A: Some pullers require the use of hot glue. This type of glue is used because of its strength and cleanliness. The heat doesn’t affect your car’s paint. It also comes off cleanly in one piece once it has cooled down. The glue simply snaps off, leaving no sign that it was ever there.
Q: Is There Any Prep Work to Use A Dent Puller?
A: If you’re using a hammer rod on the opposite side of the dent, you may have to remove some interior panels. However, other types of pullers don’t require much prep work at all. With any puller, it’s recommended that you clean and dry the work area. This can ensure that the process goes smoothly. If you’re using a bridge puller, the only preparation you’ll need to do is heat up the hot glue.
A car dent puller is a must-have tool for any garage. They can help you keep your car in great condition. With all the great options available, you won’t have any trouble finding a tool that’s right for your particular project. Instead of going to an auto shop, you can invest in a high-quality puller to take care of simple dents with ease.